WS-POE-16-48v120w Passive 16-Port PoE Injector – Efficient, Scalable Power Distribution for Your IP Network

For IT professionals, network installers, and surveillance system integrators, the challenge is often the same—how to efficiently power multiple PoE devices like IP cameras, VoIP phones, and wireless access points without a mess of power bricks and wall outlets. The solution? The WS-POE-16-48v120w passive PoE injector.

Engineered for high-performance network environments, this 16-port passive injector delivers 48 volts of consistent power with a total capacity of 120 watts, making it ideal for rack-mounted deployments and professional setups. Whether you’re managing a large IP surveillance system, deploying office VoIP infrastructure, or expanding a wireless network, the WS-POE-16-48v120w provides a clean, scalable, and cost-effective power solution.

Key Features of the WS-POE-16-48v120w

✅ 16 Passive PoE Ports

The WS-POE-16-48v120w comes equipped with 16 passive PoE ports, designed to deliver both data and power over a single Ethernet cable. This simplifies installations, reduces cable clutter, and eliminates the need for separate power adapters. You can run everything—power and data—through Cat5, Cat5e, or Cat6 Ethernet cables.

✅ 48V 120W Power Output

Delivering 48 volts at a total power capacity of 120 watts, this injector can reliably power up to 16 PoE-enabled devices simultaneously. It’s more than capable of handling standard PoE devices like IP cameras, VoIP phones, wireless access points, and even small PoE switches or media converters.

This makes it perfect for medium-sized setups that demand high efficiency, minimal downtime, and reduced complexity.

✅ Plug-and-Play Simplicity

Unlike managed PoE switches that require configuration, the WS-POE-16-48v120w offers simple plug-and-play operation. Just connect your network switch or router to the data input ports and plug your devices into the output ports—power is instantly supplied.

There’s no software setup, no configuration, and no delay. It’s designed to work right out of the box, minimizing installation time and technical headaches.

✅ Built for IP Cameras, Access Points, and VoIP

Whether you’re building out a 16-channel surveillance system, managing a cluster of wireless access points, or setting up VoIP phones in an office, this PoE injector offers the right amount of power and reliability. Each port is engineered to safely provide passive power to compatible PoE devices without interference or signal degradation.

✅ Rack-Mountable Design

Designed with rack installations in mind, the WS-POE-16-48v120w fits cleanly into professional server cabinets or wall-mount racks. Its compact size, combined with industrial-grade construction, makes it perfect for IT closets, control rooms, and network hubs where space and airflow matter.

✅ Uninterrupted Power and Stability

The power delivery of the WS-POE-16-48v120w is stable and consistent. Your devices receive uninterrupted energy, which is essential for IP cameras in security environments, always-on VoIP lines, or Wi-Fi access points servicing dozens of users.

Unlike standard power injectors that may overheat or falter under continuous use, this unit is built for 24/7 operation in mission-critical scenarios.

Why Choose the WS-POE-16-48v120w?

• Scalable Power Solution: Grow your network without needing a new power source for every new device.

• Cost-Effective: No need for expensive managed PoE switches if you already have a working Ethernet switch.

• Energy Efficient: Centralized power management reduces energy waste and power brick clutter.

• Safe and Passive: Designed for passive PoE standards (no auto-negotiation), making it simpler and safer for compatible devices.

• Professional Aesthetics: Clean, rack-mountable design blends perfectly with professional IT environments.

• Ideal for a Range of Applications: From office deployments to security systems and industrial networks, the WS-POE-16-48v120w is an all-around performer.

Installation Is a Breeze

You don’t need to be a networking expert to install the WS-POE-16-48v120w. The process is as straightforward as it gets:

1. Connect your uplink Ethernet switch (data-only) to the data-in ports.

2. Connect your PoE devices to the data+power ports.

3. Plug in the unit’s AC power source, and you’re done.

This makes it perfect for on-the-go installers who need to get a job done quickly and efficiently.

Ideal Use Cases

This PoE injector shines in any professional environment where multiple PoE devices are deployed:

• Business Offices: Power multiple VoIP phones and access points from a single source.

• Retail and Warehouses: Keep security cameras and scanners running consistently.

• Schools and Campuses: Simplify the powering of IP cameras, intercoms, and wireless networks.

• Hospitality: Deploy guest access points and IP-based security systems easily.

• Surveillance Systems: Ideal for powering NVR-connected IP cameras over long distances.

If you’re seeking a robust, efficient, and scalable solution to power multiple PoE-enabled devices, the WS-POE-16-48v120w is the product you need. With its 16-port capacity, solid 48V output, and passive PoE simplicity, it allows you to build and maintain a powerful network without overcomplicating your setup.

Built for professionals and installers who value uptime and reliability, this passive injector checks every box—performance, protection, practicality, and price.

Upgrade your power distribution today with the WS-POE-16-48v120w, and experience streamlined networking at its best.